10 Conflex Risers


  • ConFlex Risers are designed to meet or exceed pressure rating of PE pipe per 49 CFR Part 192 and ASTM D2513
  • Conflex Risers conform to trench depth and flex with ground movement.
  • ConFlex Risers may be installed with or without meter set present.
  • ConFlex Risers have a swivel feature to allow tightening the service head adapter without turning the flex hose.
  • Service head adapter design has been used in the natural gas industry since 1967
    • The Service Head Adapter offers a simple and dependable installation method
    • The stiffener is integral to the adapter coupling. it does not fall out. No loose components.
    • The Service Head Adapter design is listed by IAPMO and CSA
    • Service Head Adapter meets the requirements of ASTM F 1948 and ASTM D 2513
  • ConFlex Risers meet the requirements of…
    • ASTM D2513
    • D.O.T. Title 49 of the Code of Federal Regulations, Part 192.283 (b) and 192.375
    • NFPA 54 and NFPA 58
      • ConFlex Risers have a moisture seal as required in NFPA 54 and NFPA 58
      • The Flex hose meets 300 lbs tensile requirement and 1,000 crush requirement stated in NFPA 58
      • The Flex hose to service head adapter joint meets 3001b tensile requirement stated in NFPA 58
      • Liner Sleeve provided to meed requirements of NFPA 58

T- Coflex Riser 1.2